Based on the absorption of the foreign technology and innovate, there are more than 20 invention patents. All the parts are made of stainless steel 304(pipeline and inside and outside of tanks are polished very well). In the production process, we will make a very strict inspection on welding. The quality of our products reaches the first class in China.

Grist mill

Material: Stainless steel; Power: 2.5KW

Double roller type, designed specifically for malt mill

Accessories: Contains motor, motor mounts, rolls, shafts, bearings gear boxes, pulley, belts, etc.

Roller width is adjustable, eliminate the noise.

Little dust, low noise, work environment has been greatly improved.

The inner is equipped with dust plate, sealed performance is good, avoid the small things after crushing grain splash.

For 500L batches, it will be finished in 30 minutes.

Mash/Boiling Tun

Gross capacity: 700L;

Useful capacity: 500L

Outline size:φ1160×2150mm

Inner-Jacket(SUS304) thickness: 3.0mm

External-Jacket(SUS 304) thickness: 2.0mm

Seal head thickness: 3.0mm. 

Insulation layer: Rock wool material, Insulation thickness: 80mm

Inner polishing accuracy: Ra0.4µm

Equipped with blender; Power: 0.55KW;

Output speed:1-43RPM( frequency control)

Heating way: steam heating

Heat exchange area: 0.5㎡, The heating rate: 1.5℃/min

The operation pressure of jacket: 3bar，the design pressure of jacket: 5bar

Insulation layer: Rock wool material, Insulation thickness: 80mm

Inner polishing accuracy: Ra0.4µm

Top manhole door: Diameter: 500mm with safety sight-glass, atmospheric pressure manhole design

Temperature way: temperature probe PT100, temperature transmitting. Temperature control screen display

CIP cleaning device: Material: SUS 304

Outsourcing surface: Weld polishing processing

Combined Lauter & Whirlpool Tank

Gross capacity:700L,

Useful capacity:500L

Outline size:φ1160×2150mm

Inner-Jacket(SUS304) thickness: 3.0mm

External-Jacket(SUS 304) thickness: 2.0mm

Seal head thickness: 3.0mm. 

Milled sieve plate, Filter gap 0.7mm

Insulation layer: Rock wool, Insulation thickness: 80mm

Inner polishing accuracy: Ra0.4µm

Equipped with raker; Power: 0.55KW;

Output speed:1-29RPM( frequency control)

With condensed water collecting ring and drain pipe

With tangential inlet, DN40,

Oblique bottom: angle is 2°

Top manhole door: Diameter: 500mm with safety sight-glass, atmospheric pressure manhole design

Temperature way: temperature probe PT100, temperature transmitting. Temperature control screen display

CIP cleaning device: Material: SUS 304

Flushing device: bottom mounted, equipped with special nozzle and combination check valve

Washing out device: evenly distributing washing water including ring pipe

Outsourcing surface: Weld polishing processing

Cooking tank

Gross capacity: 1150L, 

Useful capacity: 1000L.

Outline size:φ860×2550mm

Heat exchange area: 1.2㎡

Inner(SUS304) thickness: 3.0mm;

External-Jacket(SUS304) thickness:2.0mm;

Insulation layer: Rock wool material, Insulation thickness: 80mm

Inner polishing accuracy: Ra0.4µm

Temperature way: temperature probe PT100,temperature transmitting. Temperature control screen display.

CIP cleaning device: Material: SUS 304; Comprehensive cleaning.

Outsourcing surface: Weld polishing processing.

Pot body processing technology: All argon gas protection welding.

Operation Platform

Its size is determined by your brewery room.

Production according to the mash combination supporting.

Adopt non-slip design.

Plate- type Heat Ex-changer

BR0.1/6 6㎡

Outline size: 540×320×710 mm (L*W*H)

304 Stainless steel material 

Design pressure:1.0Mpa;

Working temperature:170°

Sealing material: nitrile-butadiene rubber 

Clamp connection: with clamp connector

Wort outlet: with bimetallic thermometer (0-100℃)

Cooling medium: with 2 bimetallic thermometers in wort inlet

(water from 0-100℃, glycol water from -50 ~ 50℃)

Double-section cooling: (water-cooled + glycol cold)

one wort pump and one hot water pump

Capacity: 3000L/h

Food grade efficient centrifugal pump;

Power:0.75KW. lift：18m

High-temperature resistance: 120°C

Controlled by variable frequency drives (VFD’s)

Inletφ38, Exitφ32, Clamp connection.

Steam Generator

Rated working pressure: 0.4/0.7Mpa

Saturated steam temperature: 151℃/171℃

Rated feeding water temperature:20℃

Thermal efficiency:88-94%

Level gauge (DN):25mm

Steam pipe diameter: DN50

Safety valve diameter:DN25

Water inlet diameter: DN25

With soft water equipment and feeding water pump